submersible centrifugal slurry pump

This vertical submersible pump has the structure of the pump Single-stage and single suction cantilever, with the bearing housing, and the intermediate tube connecting the hydraulic components to the pump. The principle of operation of the centrifugal submersible pump is that the water is drained from the drain hose, and the pump impeller is semi wrapped with the stirring blade to the extended range.
The main feature of this slurry submersible centrifugal pump is that the parts of the tree that pump submarines have sufficient rigidity. The impeller and the casing of the pump have no bearings, no shaft seal, which can carry more solid particles. The insertion length of the water by the slurry pump is between 800 and 2000; the suction pipe can be adapted if necessary. The sealing of the shaft extends into the pump under water without the establishment of the shaft seal, the drive must be installed with the vertical engine on the seat supports and connecting with the pump coupling.

This vertical submersible pump is designed for delivery corrosive, coarse particles and high density sludge. The pump is widely used for metallurgy, mining, coal, power plant, building materials and industrial services environmental protection, etc.

Casing of the pump and motor are integrated in an independent housing. During operation, the motor rotates the wheels to allow media to have energy. It creates a speed that will drive solid move.

1. The engine is designed with a mechanical seal protection, effectively preventing high pressure water and impurities from entering the motor cavity. In addition to the main wheel, there is the mixing wheel to extract the sediment in the water.
2 Abrasion resistant :. Wheel, mixing the wet parts are made of high wear resistance materials, abrasion resistance and no blocking, with good sewage discharge capacity.
.3 Profitability: This vertical submersible pump should not be configured with a vacuum pump.
4 Convenience :. It is not necessary to mix spraying and configuration of the apparatus; it is easy to use. When the engine is under water, there is no need land protection device or accessories.
5 No noise or vibration. the surface of the turbine is in direct contact with the deposit mix, density is controlled by the depth of diving.