General Information
Sintering, the production of iron, the manufacturing of the steel and the steel rolling are major industrial processes adopted by the steel iron companies. As to the choice of pumps of the manufacture of iron and steel in the finishing process, pumps for the desulfurization sintering, blast furnace slag washing converter, the continuous steel powder of cooling and the cooling system for the steel rolling process are mainly used. Slurry pumps are mainly applied in the sintering desulfurization and blast furnace slag washing process, and pumps double suction and slurry pumps are often used for the converter, the cooling of the continuous steel caster and cooling system for the steel rolling process. Introduction of industrial processes and how to choose the pumps are primarily about industrial pumps for blast furnace slag washing process.

Customer requirement
1. Product Structure
No special requirements on the single box or jacket
Packing the shaft seal by a mechanical seal
Using input and output metric flange

2.Duration life
The engineering company requires one year, others require against one and a half instead of two years to life.

3.Structure
shaft seal uses packing seal; the metric flange
The wet parts service life should be more than a year.

Plan Product requirement
The pumps for non-aggressive applications can be a single casing structure. The standards for equipment of wet parts can be lowered.

As regards the high-temperature application, cavitation performance should be enhanced.
Develop low-abrasive materials.
Direct drive is required for some pumps